Description: Heating roller assy failure to turn. <bizhub 554e> The hard latch signal from one or both of the heating roller rotation latch detection 1 and the heating roller rotation latch detection 2 is turned ON.
Causes: • Heating roller rotation sensor (PS37) • Fusing motor (M3) • Printer control board (PRCB) • Fusing unit
Remedy: 1 Check the fusing unit for proper installation and correct as necessary. 2 Check the connector between M3-PRCB CN2 for proper connection and correct as necessary. 3 Check the connector of M3 for proper drive coupling and correct as necessary. 4 PS37 I/O check, sensor check 5 M3 operation check PRCB CN2-9 (REM) PRCB CN2-12 (LOCK) 22-J 7 Replace M3 8 Replace the fusing unit 9 Replace PRCB