Description: Tray 1 feeder up/down abnormality • The tray 1 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Causes: Tray 1 upper limit sensor (PS6) Tray 1 lift-up motor (M6) Paper feed/transport drive board (PFTDB) Printer control board (PRCB)
Remedy: 1 Check the M6 connector for proper connection and correct as necessary. 2 Check the connector of M6 for proper drive coupling and correct as necessary. 3 PS6 I/O check, sensor check PFTDB CN11-3 (ON) Q-1 4 M6 operation check PFTDB CN23-9 to 10 X-3 5 Change M6 6 Change PFTDB 7 Change PRCB