Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1140 — Konica-Minolta bizhub 502

Code: C1140

Description: Side-staple rear adjust drive motor malfunction <When FS-526 is installed> • The 2 staples alignment motor home sensor/ R (PS18) is not turned ON even after the set period of time has elapsed while the alignment plate motor/R (M12) is energized.
Causes: Alignment plate motor/R (M12) 2 staples alignment motor home sensor/R (PS18) FS control board (FSCB)
Remedy: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M12 for proper drive coupling, and correct as necessary. 3 PS18 I/O check, sensor check FSCB CN20<A>-3 (ON) FS-526 L-11 4 M12 operation check FSCB CN19-5 to 8 FS-526 D-13 5 Change M12 6 FSCB ICP4 conduction check 7 Change PKDB

← Xem tất cả mã lỗi Konica-Minolta bizhub 502

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie