Code: C1150
Description: Center-staple rear adjust drive motor malfunction <When FS-526+SD-508 is installed> • The center staple alignment motor home sensor/R (PS31) is turned neither ON nor OFF even after the set period of time has elapsed after the center staple alignment motor /R (M21) is turned ON. <When FS-527+SD-509 is installed> • The center staple alignment home sensor/R (PS41) is turned neither ON nor OFF even after the set period of time has elapsed after the center staple alignment motor/R (M23) is turned ON.
Causes: (1) When FS-526+SD-508 is installedCenter staple alignment motor /R (M21) Center staple alignment motor home sensor/R (PS31) SD drive board (SDDB) FS control board (FSCB) (2) When FS-527+SD-509 is installed Center staple alignment motor/R (M23) Center staple alignment home sensor/R (PS41) SD drive board (SDDB) FS control board (FSCB)
Remedy: (1) When FS-526+SD-508 is installed 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M21 for proper drive coupling, and correct as necessary. 3 PS31 I/O check, sensor check SDDB CN403-14 (ON) SD-508 C-9 4 M21 operation check SDDB CN403-5 to 8 SD-508 C-9 5 Change M21 6 SDDB ICP4 conduction check 7 Change SDDB 8 Change FSCB. (2) When FS-527+SD-509 is installed 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M23 for proper drive coupling, and correct as necessary. 3 PS41 I/O check, sensor check SDDB PJ9-3 (ON) SD-509 G-2 4 M23 operation check SDDB P7-5 to 8 SD-509 G-2 5 Change M23 6 Change SDDB 7 Change FSCB