Code: C1158
Description: Center-staple paddle roller motor malfunction (leading edge) <When FS-527+SD-509 is installed> • Even after the set period of time has elapsed after the lower paddle motor (M22) starts running, a change of motor lock signal is not detected and neither the paper sensor/ 1 (PS43) nor the paper sensor/2 (PS44) is turned ON.
Causes: lower paddle motor (M22) Paper sensor/1 (PS43) Paper sensor/2 (PS44) SD drive board (SDDB) FS control board (FSCB)
Remedy: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M22 for proper drive coupling, and correct as necessary. 3 PS43 I/O check, sensor check SDDB PJ9-8 (ON) SD-509 G-1 4 PS44 I/O check, sensor check SDDB PJ13-2 (ON) SD-509 G-3 5 M22 operation check SDDB PJ5-1 to 5 SD-509 B-4 6 Change M22 7 Change SDDB 8 Change FSCB