Description: Secondary transfer roller pressure welding alienation • The pressure welding alienation sensor doesn’t turn OFF (retracting) even after the lapse of a given period of time after the 2nd transfer pressure retraction motor has started rotating during the 2nd transfer roller is retracting. • The pressure welding alienation sensor doesn’t turn ON (pressuring) even after the lapse of a given period of time after the 2nd transfer pressure retraction motor has started rotating during the 2nd image transfer roller is pressuring.
Causes: Pressure welding alienation sensor (PS50) 2nd transfer pressure retraction motor (M3) Printer control board (PRCB)
Remedy: 1 Check the M3 connector for proper connection and correct as necessary. 2 PS50 I/O check, sensor check PFTDB CN4-9 (ON) Q-5 3 M3 operation check PFTDB CN5-3 (REM) Q-6 4 Change M3 5 Change PRCB