Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
Causes: PH unit PH relay board (REYB/PH) Printer control board (PRCB)
Remedy: 1 Check the connector for proper connection and correct as necessary. 2 Change PH unit 3 REYB/PH ICP6 conduction check 4 Change REYB/PH 5 PRCB ICP17 conduction check 6 Change PRCB