Code: C1156
Description: Center-staple paddle roller motor malfunction (trailing edge) <When FS-526+SD-508 is installed> • The center staple paddle/T (M29) lock signal remains set to L for a set period of time while the center staple paddle/T (M29) is turning. <When FS-527+SD-509 is installed> • Even after the set period of time has elapsed after the upper paddle motor (M21) starts running, a change of motor lock signal is not detected and neither the paper sensor/ 1 (PS43) nor the paper sensor/2 (PS44) is turned ON.
Causes: (1) When FS-526+SD-508 is installed: Center staple paddle/T (M29) SD drive board (SDDB) FS control board (FSCB). (2) When FS-527+SD-509 is installed: Upper paddle motor (M21) Paper sensor/1 (PS43) Paper sensor/2 (PS44) SD drive board (SDDB) FS control board (FSCB)
Remedy: (1) When FS-526+SD-508 is installed: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M29 for proper drive coupling, and correct as necessary. 3 M29 operation check SDDB CN404-1 to 5 SD-508 C-8 4 Change M29 5 SDDB ICP5 conduction check 6 Change SDDB 7 Change FSCB. (2) When FS-527+SD-509 is installed: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M21 for proper drive coupling, and correct as necessary. 3 PS43 I/O check, sensor check SDDB PJ9-8 (ON) SD-509 G-1 4 PS44 I/O check, sensor check SDDB PJ13-2 (ON) SD-509 G-3 5 M21 operation check SDDB PJ5-6 to 10 SD-509 B-3 6 Change M21 7 Change SDDB 8 Change FSCB