Description: Cleaner motor’s turning at abnormal timing • The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary.
Causes: Cleaner motor (M38) Printer control board (PRCB)
Remedy: 1 Check the M38 connector for proper connection and correct as necessary. 2 Check the M38 connector for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M38 operation check PRCB CN2-3 (REM) PRCB CN2-6 (LOCK) K-13 5 Change M38 6 PRCB ICP18 conduction check 7 Change PRCB