Description: Manual feed up/down abnormality. • Paper does not unblock the bypass lift-up position sensor (PS26) even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. • The bypass lift-up position sensor (PS26) is not blocked even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
Causes: • Paper feed motor (M22) • Bypass pick-up solenoid (SD1) • Bypass lift-up position sensor (PS26) • Printer control board (PRCB) • Expansion control board (EXCB)
Remedy: 1 Check the connector between M22-EXCB CN3 for proper connection and correct as necessary. 2 Check the connector of M22 for proper drive coupling and correct as necessary. 3 Check the connector between PS26-relay CN19- PRCB CN27 for proper connection and correct as necessary. 4 Check the connector between SD1-relay CN21-relay CN19-PRCB CN27 for proper connection and correct as necessary. 5 PS26 I/O check, sensor check PRCB CN27-13 (ON) 4-C 6 SD1 operation check PRCB CN27-10 (ON) 4-C 7 M22 operation check EXCB CN3-5 to 8 22-P 8 Replace M22 9 EXCB IC4 conduction check 10 Replace EXCB 11 Replace PRCB