Description: Drum unit new release failure. The status with the new unit is not cleared after the new drum unit is set.
Causes: • Drum unit • Front side board (FRB) • Printer control board (PRCB)
Remedy: 1 Clean the connection between the drum unit and the developing unit if dirty 2 Reinstall drum unit 3 Check the connector between drum unit-FRB CN12 for proper connection and correct as necessary. 4 Check the connector between FRB CN1, CN3-PRCB CN7, CN9 for proper connection and correct as necessary. 5 Replace the drum unit 6 Replace FRB 7 Replace PRCB