Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1150 — Konica-Minolta bizhub 602

Code: C1150

Description: Center-staple rear adjust drive motor malfunction <When FS-526+SD-508 is installed> • The center staple alignment motor home sensor/R (PS31) is turned neither ON nor OFF even after the set period of time has elapsed after the center staple alignment motor /R (M21) is turned ON. <When FS-527+SD-509 is installed> • The center staple alignment home sensor/R (PS41) is turned neither ON nor OFF even after the set period of time has elapsed after the center staple alignment motor/R (M23) is turned ON.
Causes: (1) When FS-526+SD-508 is installedCenter staple alignment motor /R (M21) Center staple alignment motor home sensor/R (PS31) SD drive board (SDDB) FS control board (FSCB) (2) When FS-527+SD-509 is installed Center staple alignment motor/R (M23) Center staple alignment home sensor/R (PS41) SD drive board (SDDB) FS control board (FSCB)
Remedy: (1) When FS-526+SD-508 is installed 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M21 for proper drive coupling, and correct as necessary. 3 PS31 I/O check, sensor check SDDB CN403-14 (ON) SD-508 C-9 4 M21 operation check SDDB CN403-5 to 8 SD-508 C-9 5 Change M21 6 SDDB ICP4 conduction check 7 Change SDDB 8 Change FSCB. (2) When FS-527+SD-509 is installed 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M23 for proper drive coupling, and correct as necessary. 3 PS41 I/O check, sensor check SDDB PJ9-3 (ON) SD-509 G-2 4 M23 operation check SDDB P7-5 to 8 SD-509 G-2 5 Change M23 6 Change SDDB 7 Change FSCB

← Xem tất cả mã lỗi Konica-Minolta bizhub 602

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie