Code: C1157
Description: Center-staple paddle roller motor malfunction (middle) <When FS-526+SD-508 is installed> • The center staple paddle/C (M30) lock signal remains set to L for a set period of time while the center staple paddle/C (M30) is turning.
Causes: Center staple paddle/C (M30) SD drive board (SDDB) FS control board (FSCB)
Remedy: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M30 for proper drive coupling, and correct as necessary. 3 M30 operation check SDDB CN406<B>-11 to 15 SD-508 K-10 4 Change M30 5 SDDB ICP5 conduction check 6 Change SDDB 7 Change FSCB