Code: C2557
Description: Abnormally low toner density detected black TCR sensor • When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though there is toner in the sub hopper.
Causes: Developing unit Toner cartridge Toner empty sensor/K (PZS/K) Toner supply motor/K (M12) Toner cartridge motor C/K (M14) Printer control board (PRCB)
Remedy: 1 Perform image troubleshooting procedure if image density is low. 2 M12 operation check (At this time, developing/drum unit must be non-installation.) PRCB CN19-13 to 16 C-20 3 M14 operation check PRCB CN20-9 to 12 K-8 4 Reinstall developing unit 5 Reinstall toner cartridge 6 If the toner empty sensor and its surroundings inside the sub hopper are dirtied with toner, clean them. 7 Change developing unit 8 Change PRCB.