Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0204 — Konica-Minolta bizhub 654

Code: C0204

Description: Tray 2 feeder up/down abnormality. The tray 2 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Causes: • Tray 2 upper limit sensor (PS14) • Tray 2 lift-up motor (M8) • Paper feed/transport drive board (PFTDB) • Printer control board (PRCB)
Remedy: 1 Check the connector between M8-PFTDB CN26 for proper connection and correct as necessary. 2 Check the connector of M8 for proper drive coupling and correct as necessary. 3 Check the connector between PS14-relay CN155BPFTDB CN14 for proper connection and correct as necessary. 4 PS14 I/O check, sensor check PFTDB CN14-9 (ON) 4-P 5 M8 operation check PFTDB CN26-10 to 11 4-X 6 Replace M8 7 PFTDB ICP10 conduction check 8 Replace PFTDB 9 Replace PRCB

← Xem tất cả mã lỗi Konica-Minolta bizhub 654

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie