Description: Black TCR sensor failure Alarm signals for a TCR sensor is detected more than the predetermined number of times. This detection is used for detecting disconnection of TCR sensor connector.
Causes: • Developing unit • PH relay board (PHRYB) • Printer control board (PRCB)
Remedy: 1 Reinstall the developing unit 2 Check the harness from developing unit to PHRYB CN2 for proper connection and correct as necessary. • CN2: Developing unit 3 Replace the developing unit 4 PHRYB ICP2 or ICP5 conduction check 5 Replace PHRYB 6 Replace PRCB