Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
Causes: • PH unit • PH relay board (PHRYB) • Printer control board (PRCB)
Remedy: 1 Check the connector between the PH unit-PHRYB CN16 for proper connection and correct as necessary. 2 Replace the PH unit 3 PHRYB ICP3 conduction check 4 Replace PHRYB 5 Replace PRCB