Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C2557 — Konica-Minolta bizhub 654e

Code: C2557

Description: Abnormally low toner density detected black TCR sensor When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though there is toner in the sub hopper.
Causes: • Developing unit • Toner cartridge • Toner empty sensor/K (PZS/K) • Toner supply motor/K (M12) • Toner cartridge motor /CK (M14) • Printer control board (PRCB)
Remedy: 1 Perform image troubleshooting procedure if image density is low. 2 Check the connector between M12-relay CN258- PRCB CN3 for proper connection, and correct as necessary. 3 Check the connector between M14-relay CN321-relay CN428-PRCB CN4 for proper connection, and correct as necessary. 4 Check the connector of M12 and M14 for proper drive coupling and correct as necessary. 5 M12 operation check (At this time, developing/drum unit must be noninstallation.) PRCB CN3-1 to 4 23-C 6 M14 operation check PRCB CN4-1 to 4 3-K 7 Replace M12 and M14 8 Reinstall developing unit 9 Reinstall toner cartridge 10 If the toner empty sensor and its surroundings inside the sub hopper are dirtied with toner, clean them. 11 Replace the developing unit 12 PRCB ICP23 or ICP24 conduction check 13 Replace PRCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub 654e

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie