Description: Heating roller failure to turn. During any state other than printing operation , the hard latch signal from one or both of the heating roller rotation latch detection 1 and the heating roller rotation latch detection 2 is turned ON.
Causes: • Heating roller rotation sensor (PS56) • Fusing motor (M30) • Printer control board (PRCB) • Fusing unit
Remedy: 1 Check the fusing unit for proper installation and correct as necessary. 2 Check the connector between M30-PRCB CN30 for proper connection and correct as necessary. 3 Check the connector of M30 for proper drive coupling and correct as necessary. 4 PS56 I/O check, sensor check 5 M30 operation check PRCB CN30-4 (REM) PRCB CN30-7 (LOCK) 4-K 6 PRCB ICP15 conduction check 7 Replace M30 8 Replace the fusing unit 9 Replace PRCB