Description: Exposure LED lighting failure • The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment. • The wrong model of firmware is detected in the MFP board when the main power switch is turned ON. • The machine type information (Machine, Type) registered to the machine differs from the actual machine type.
Remedy: 1 Check the machine type information registered and reenter as necessary. 2 Check the connection between SCDB and LA201, and correct if necessary. 3 Check the connection between SCDB and MFPB, and correct if necessary. 4 Check that the connection between CCDB and MFPB, and correct if necessary. 5 Replace the LED exposure unit 6 Replace the CCD unit 7 SCDB F1 conduction check 8 Replace SCDB 9 Replace MFPB