Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C2151 — Konica-Minolta bizhub 754e

Code: C2151

Description: Secondary transfer roller pressure welding alienation • The 2nd transfer pressure sensor (PS50) doesn't unblock (retracting) even after the lapse of a given period of time after the 2nd transfer pressure motor (M3) has started rotating during the 2nd image transfer roller is retracting. • The 2nd transfer pressure sensor (PS50) doesn't block (pressuring) even after the lapse of a given period of time after the 2nd transfer pressure motor (M3) has started rotating during the 2nd image transfer roller is pressuring.
Causes: • 2nd transfer pressure sensor (PS50) • 2nd transfer pressure motor (M3) • Paper feed/transport drive board (PFTDB) • Printer control board (PRCB)
Remedy: 1 Check the connector between M3-relay CN271BPFTDB CN10 for proper connection and correct as necessary. 2 Check the connector of M3 for proper drive coupling and correct as necessary. 3 Check the connector between PS50-relay CN271APFTDB CN3 for proper connection and correct as necessary. 4 PS50 I/O check, sensor check PFTDB CN3-9 (ON) 5-P 5 M3 operation check PFTDB CN10-1 to 2 5-P 6 Replace M3 7 PFTDB ICP16 conduction check 8 Replace PFTDB 9 Replace PRCB

← Xem tất cả mã lỗi Konica-Minolta bizhub 754e

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie