Code: C1102
Description: Main tray up/down motor’s drive malfunction <When FS-534 is installed> • While the exit tray is being lifted, the main tray upper position sensor (PS26/PS27) is not blocked and the main tray upper position detect switch (SW2) is not turned ON, even after the main tray up/down motor (M11) turns by the set number of times. • While the exit tray is being lowered, the main tray full detection sensor (PS29) is not blocked after the set period of time has elapsed after the main tray up/down motor (M11) is turned ON. <When FS-535 is installed> • The main tray upper limit sensor (PS44/PS45) is turned ON even after the set period of time has elapsed while the main tray up/down motor (M5) is energized. • The staple paper exit top surface sensor (PS7) is unblocked even after the set period of time has elapsed while the main tray up/down motor (M5) is energized.
Causes: <When FS-534 is installed> • Main tray up/down motor (M11) • Main tray upper position sensor/R (PS26) • Main tray upper position sensor/F (PS27) • Main tray full detection sensor (PS29) • Main tray upper position detect switch (SW2) • FS control board (FSCB) <When FS-535 is installed> • Main tray up/down motor (M5) • Main tray upper limit sensor/in (PS44) • Main tray upper limit sensor/out (PS45) • Staple paper exit top surface sensor (PS7) • FS control board (FSCB)
Remedy: When FS-534 is installed: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M11 for proper drive coupling, and correct as necessary. 3 PS26 I/O check, sensor check FSCB J14<A>-5 (ON) FS-534 2-C 4 PS27 I/O check, sensor check FSCB J14<B>-8 (ON) FS-534 3-C 5 PS29 I/O check, sensor check FSCB J14<A>-8 (ON) FS-534 4-C 6 SW2 operation check FSCB J10-1 to 2 FS-534 8-K 7 M11 operation check FSCB J9<A>-9 to 10 FS-534 10-C to D 8 Replace M11 9 Replace FSCB. When FS-535 is installed: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. 2 Check the connector of M5 for proper drive coupling, and correct as necessary. 3 PS44 I/O check, sensor check FSCB CN24-2 (ON) FS-535 8-L 4 PS45 I/O check, sensor check FSCB CN18-1 to 3 FS-535 13-D 5 PS7 I/O check, sensor check FSCB CN23-15 (ON) FS-535 13-L 6 M5 operation check FSCB CN22-1 to 11 FS-535 5-L 7 Replace M5 8 FSCB ICP1 conduction check 9 Replace FSCB