Code: C4001
Description: Faulty HSYNC (SOS)
- The SOS sensor does not detect a rising edge of SOS within a given period of time after the polygon motor has started turning and a laser output has been started.
- The SOS sensor detects no falling edges of SOS while VIA (image area control) is ON.
- The SOS sensor does not detect a rising edge of SOS within a given period of time after the polygon motor has started turning and a laser output has been started.
- The SOS sensor detects no falling edges of SOS while VIA (image area control) is ON.
Remedy: 1 Turn OFF and ON the power switch. 2 Check the connector between PH unit-MFPB P001, P002 for proper connection and correct as necessary. 3 Change PH unit. 4 Change MFPB.