Code: C3451
Description: Warming-up failure • The surface temperature of the fusing roller does not reach a given level even after the lapse of a given period of time during a warm-up cycle.
Causes: Fusing unit Right door switch (SW2) DC power supply (DCPU) Printer control board (PRCB)
Remedy: 1 Check the fusing unit for correct installation. 2 Check the open/close operation of the right door. 3 Check the fusing unit, DCPU and PRCB for proper connection and correct or change as necessary. 4 Change fusing unit. 5 Change PRCB. 6 Change DCPU.