Code: C-1534
Description: The booklet rear edge pressing process has not been completed within a specified period of time after the booklet stopper motor (M65) turns ON.
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Booklet stopper motor (M65) DIPSW7-6
Remedy: 1. Check the booklet conveyance section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: PB-503: 16-D) 5. Replace M65. 6. Replace PBDB1. 7. Replace PBCB.