Code: C-2233
Description: Waste toner box swing motor (M19) rotation abnormality. The M19EM error detection signal is not detected twice in succession within a specified period of time after M19 was turned ON.
Causes: • Waste toner box swing motor (M19) • Printer control board (PRCB)
Remedy: 1. Check the waste toner box swing section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PRCB and the motor, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:Main body (3/4): 11-P) 4. Replace M19. 5. Replace PRCB.