Code: C-C117
Description: When the sub power switch (SW2) turns ON, ISW unwritten area is detected in the GP firmware.
Causes: • GP firmware • Punch Controller PCB
Remedy: 1. Reinstall the GP firmware. 2. Check the connector connection and the wiring between the main body and each option, and repair it if any abnormality. 3. Check the I/F connector connection and the wiring for ISW on RBU, and repair it if any abnormality. 4. Check the connector connection and the wiring of RBU, OB4 and OACB, and repair it if any abnormality. 5. Replace punch controller PCB.