Code: 0650
Description: SCANNER MOTION ERROR CHECK SCANNER LOCK Scanner home sensor abnormalities • A low motor lock signal is not detected even after the lapse of a predetermined period of time after the polygon motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period of time while the polygon motor remains energized.
Remedy: 1 Check to see if the lock lever of the Scanner unit is unlocked and unlock the lock lever if it is locked. 2 Check the M100 connector for proper connection and correct as necessary. 3 Check M100 for proper drive coupling and correct as necessary. 4 Check the PRCB connector for proper connection and correct as necessary. 5 M100 operation check. 6 Change PRCB. 7 Change DCPU.