Code: 59
Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.)
Causes: The center thermistor of fuser unit detects error.
Remedy: 1 Harness connection failure between fuser unit connector and paper eject sensor PCB ASSY Check the harness connection between the fuser unit connector and paper eject sensor PCB ASSY, and reconnect it. 2 Harness connection failure between fuser unit connector and low voltage power supply PCB ASSY Check the harness connection between the fuser unit connector and low voltage power supply PCB ASSY, and reconnect it. 3 Harness connection failure between paper eject sensor PCB and main PCB Check the harness connection between the paper eject sensor PCB and main PCB, and reconnect it. 4 Paper eject sensor PCB failure Replace the paper eject sensor PCB ASSY. 5 Low voltage power supply PCB failure Replace the low voltage power supply PCB ASSY. 6 Main PCB failure Replace the main PCB ASSY. 7 Fuser unit failure Replace the fuser unit.