Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E2 — Brother MFC7860DW

Code: E2

Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
Causes:
Remedy: 1 Heat roller dirty Clean the heat roller. 2 Harness connection failure between paper eject sensor PCB ASSY and fuser unit Check the harness connection between the paper eject sensor PCB ASSY and fuser unit, and reconnect it. 3 Side thermistor or center thermistor failure Replace the fuser unit. 4 Paper eject sensor PCB failure Replace the paper eject sensor PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.

← Xem tất cả mã lỗi Brother MFC7860DW

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie