Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CD252 — Konica-Minolta bizhub C258

Code: CD252

Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
Causes: • MFP board (MFPB) • EFI relay board (VI-508)
Remedy: 1. If the IC-416 is not mounted, access [Service Mode] -> [System 2] -> [Image Controller Setting] and check to see if “Controller 0” is set for the image controller. 2. Check the EFI relay board (VI-508) connector for proper connection and correct as necessary. 3. Replace EFI relay board (VI-508). 4. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C258

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie