Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 72-18 — Konica-Minolta bizhub C287

Code: 72-18

Description: <When FS-534 or FS-534SD is installed> • The saddle exit sensor (PS5) is not turned ON even after the set period of time has elapsed after the FNS entrance sensor (PS4) is turned ON by the paper. • While the buffer is controlled, the saddle exit sensor (PS5) is not tuned ON even after the set period of time has elapsed after the reverse rotation drive is started.
Causes: • FNS entrance sensor (PS4) • Saddle exit sensor (PS5) • FS control board (FSCB)
Remedy:

← Xem tất cả mã lỗi Konica-Minolta bizhub C287

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie