Description: Tray 3/LCT vertical transport motor turning at abnormal timing (When PC-114, PC-214 or PC-414 is installed) • The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning. • The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary.
Causes: <When PC-114 or PC-214 is installed> • Tray 3 vertical transport motor (M112) • PC control board (PCCB) <When PC-414 is installed> • Vertical transport motor (M132) • PC control board (PCCB)
Remedy: When PC-114 or PC-214 is installed 1. Check the connector between M112-PCCB CN5 for proper connection and correct as necessary. 2. Check the connector of M112 for proper drive coupling and correct as necessary. 3. M112 operation check • Control signal: PCCB CN5-13 (CW/CCW) • Location of electrical component: PC-114/PC-214 3 to 4-C 4. Replace M112. 5. Replace PCCB. NOTICE • Link to the wiring diagram (N.2.2 PC-114) • Link to the wiring diagram (N.2.3 PC-214) • Link to the layout drawings for related parts by each trouble code (S.3.1 PC-114/PC-214) When PC-414 is installed 1. Check the connector between M132-PCCB CN5 for proper connection and correct as necessary. 2. Check the connector of M132 for proper drive coupling and correct as necessary. 3. M132 operation check • Control signal: PCCB CN5-13 (CW/CCW) • Location of electrical component: PC-414 4-J 4. Replace M132. 5. Replace PCCB. NOTICE • Link to the wiring diagram (N.2.4 PC-414) • Link to the layout drawings for related parts by each trouble code (S.3.2 PC-414)