Description: Tray 1 feeder up/down abnormality. The tray 1 upper limit sensor (PS25) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Remedy: 1. Remove the tray and check to see if a piece of paper is not left inside the machine. 2. Check the connector between M12-MFPB CN7E for proper connection and correct as necessary. 3. Check the connector of M12 for proper drive coupling and correct as necessary. 4. Check the connector between PS25-relay CN53-MFPB CN5E for proper connection and correct as necessary. 5. PS25 I/O check, sensor check • Control signal: MFPB CN5E<A>-9 (ON) • Location of electrical component: 9-C 6. M12 operation check • Control signal:MFPB CN7E<A>-11 to 12 • Location of electrical component: 24-C 7. Replace M12. 8. MFPB F13E conduction check 9. Replace MFPB. NOTICE • Link to the wiring diagram (N.1. bizhub C287/C227) • Link to the layout drawings for related parts by each trouble code (S.6. C0202)