Code: C0214
Description: LCT shift failure (When PC-414 is installed) • The shifter stop / lower limit position sensor (PS138) is not turned ON (blocked) even after the set period of time has elapsed after the shift operation began (shift to the right). • The shifter home sensor (PS139) is not turned OFF (unblocked) even after the set period of time has elapsed after the shift operation began (shift to the right). • The shifter stop / lower limit position sensor (PS138) is not turned OFF (unblocked) even after the set period of time has elapsed after the return operation began (shift to the left). • The shifter home sensor (PS139) is not turned ON (blocked) even after the set period of time has elapsed after the return operation began (shift to the left).
Causes: • Shifter stop / lower limit position sensor (PS138) • Shifter home sensor (PS139) • Shifter motor (M133) • PC control board (PCCB) • MFP board (MFPB)
Remedy: 1. Remove the tray and check to see if a piece of paper is not left inside the machine. 2. Check the connector between M133-PCCB CN10L for proper connection and correct as necessary. 3. Check the connector of M133 for proper drive coupling and correct as necessary. 4. Check the connector between PS138-relay CN16-PCCB CN14L for proper connection and correct as necessary. 5. Check the connector between PS139-relay CN16-PCCB CN14L for proper connection and correct as necessary. 6. PS138 I/O check, sensor check • Control signal: PCCB CN14L-6 (ON) • Location of electrical component: PC-414 3-J 7. PS139 I/O check, sensor check • Control signal: PCCB CN14L-3 (ON) • Location of electrical component: PC-414 4-J 8. M133 operation check • Control signal: PCCB CN10L-3 to 4 • Location of electrical component: PC-414 6-J 9. Replace M133. 10. Replace PCCB. 11. MFPB F11E conduction check 12. Replace MFPB. NOTICE • Link to the wiring diagram (N.2.4 PC-414) • Link to the layout drawings for related parts by each trouble code (S.12. C0214)