Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1113 — Konica-Minolta bizhub C287

Code: C1113

Description: Center-staple lead edge stopper motor malfunction (When FS-534SD is installed) The stopper home sensor (PS6) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the stopper drive motor (M4) is turned ON.
Causes: • Stopper drive motor (M4) • Stopper home sensor (PS6) • SD drive board (SDDB) • FS control board (FSCB)
Remedy: 1. Check the connector between M4-SDDB J10 for proper connection and correct as necessary. 2. Check the connector of M4 for proper drive coupling and correct as necessary. 3. Check the connector between PS6-SDDB J10 for proper connection and correct as necessary. 4. PS6 I/O check, sensor check • Control signal: SDDB J10-5 (ON) • Location of electrical component: SD-511 2-G 5. M4 operation check • Control signal: SDDB J10-6 to 9 • Location of electrical component: SD-511 1 to 2-F to G 6. Replace M4. 7. Replace SDDB. 8. Replace FSCB. NOTICE • Link to the wiring diagram (N.2.7 SD-511) • Link to the layout drawings for related parts by each trouble code (S.21. C1113)

← Xem tất cả mã lỗi Konica-Minolta bizhub C287

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie