Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1114 — Konica-Minolta bizhub C287

Code: C1114

Description: Center-staple front adjust drive motor malfunction (When FS-534SD is installed) The alignment home sensor (PS4) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the alignment motor (M3) is turned ON.
Causes: • Alignment motor (M3) • Alignment home sensor (PS4) • SD drive board (SDDB) • FS control board (FSCB)
Remedy: 1. Check the connector between M3-relay CN10-SDDB J7 for proper connection and correct as necessary. 2. Check the connector of M3 for proper drive coupling and correct as necessary. 3. Check the connector between PS4-relay CN10-SDDB J7 for proper connection and correct as necessary. 4. PS4 I/O check, sensor check • Control signal: SDDB J7-6 (ON) • Location of electrical component: SD-511 6-F 5. M3 operation check • Control signal: SDDB J7-7 to 10 • Location of electrical component: SD-511 5-F to G 6. Replace M3. 7. Replace SDDB. 8. Replace FSCB. NOTICE • Link to the wiring diagram (N.2.7 SD-511) • Link to the layout drawings for related parts by each trouble code (S.22. C1114)

← Xem tất cả mã lỗi Konica-Minolta bizhub C287

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie