Code: C1140
Description: Alignment plate motor/Rr malfunction (When FS-533, FS-534 or FS-534SD is installed) <When FS-533 is installed> • The alignment plate home sensor/R (PS109) is not turned OFF (unblocked) after the set period of time has elapsed after the plate drive starts from the home position. • The alignment plate home sensor/R (PS109) is not turned ON (blocked) after the set period of time has elapsed while the alignment motor/R (M106) is energized when the plate returns to the home position. <When FS-534 or FS-534SD is installed> • The alignment plate/R home sensor (PS13) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed while the alignment motor/Rear (M8) is energized.
Causes: <When FS-533 is installed> • Alignment motor/R (M106) • Alignment plate home sensor/R (PS109) • FS control board (FSCB) <When FS-534 or FS-534SD is installed> • Alignment motor/Rear (M8) • Alignment plate/R home sensor (PS13) • FS control board (FSCB)
Remedy: When FS-533 is installed 1. Check the connector between M106-FSCB CN102 for proper connection and correct as necessary. 2. Check the connector of M106 for proper drive coupling and correct as necessary. 3. Check the connector between PS109-FSCB CN102 for proper connection and correct as necessary. 4. PS109 I/O check, sensor check • Control signal: FSCB CN102 • Location of electrical component: FS-533 7-J 5. M106 operation check • Control signal: FSCB CN102 • Location of electrical component: FS-533 8-J 6. Replace M106 7. FSCB CP105 conduction check 8. Replace FSCB NOTICE • Link to the wiring diagram (N.2.5 FS-533) • Link to the layout drawings for related parts by each trouble code (S.25.1 FS-533) When FS-534 or FS-534SD is installed 1. Check the connector between M8-FSCB J12 for proper connection and correct as necessary. 2. Check the connector of M8 for proper drive coupling and correct as necessary. 3. Check the connector between PS13-FSCB J9 for proper connection and correct as necessary. 4. PS13 I/O check, sensor check • Control signal: FSCB J9<B>-9 (ON) • Location of electrical component: FS-534 9-C 5. M8 operation check • Control signal: FSCB J12-13 to 16 • Location of electrical component: FS-534 5 to 6-C to D 6. Replace M8. 7. Replace FSCB. NOTICE • Link to the wiring diagram (N.2.6 FS-534) • Link to the layout drawings for related parts by each trouble code (S.25.2 FS-534/FS-534SD)