Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi D-1 — Konica-Minolta bizhub C287

Code: D-1

Description: Split line detect (front side) • While recovering from the power save mode or when the main power switch and power key are ON, it detects whether or not stain exist at the original reading glass when the DF is closed. This warning will be displayed if the original is set to DF when stain exist. • The thin line detection level and the warning display can be changed by [Service Mode] -> [System 2] -> [ADF Scan Glass Contamin. Set.].
Causes: • Glass cleaning motor (M4) • Original reading glass cleaning sensor (PS12) • DF control board (DFCB)
Remedy: 1. Wipe clean the glass surface of the original reading glass. 2. Check the glass cleaning roller unit for proper installation and correct if necessary. Clean the glass cleaning roller unit if dirty. 3. Select [Service Mode] -> [System 2] -> [ADF Scan Glass Contamin. Set.], and change the setting. 4. Check the DFCB connector for proper connection and correct as necessary. 5. M4 operation check. 6. Replace the glass cleaning roller unit. 7. Replace DFCB

← Xem tất cả mã lỗi Konica-Minolta bizhub C287

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie