Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1132 — Konica-Minolta bizhub C308

Code: C1132

Description: Punch drive motor malfunction (When FS-533+PK-519, FS-534+PK-520 or FS-534SD+PK-520 is installed) <When FS-533+PK-519 is installed> • The puncher drive cam sensor (PS203) or puncher home sensor (PS204) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed while the punch motor (M201) is energized. • The punch motor sensor (PS202) is not turned ON when the punch motor (M201) driven. • The holes with other marketing area is set in [Service Mode] -> [Finisher] -> [Punch Option Setting]. <When FS-534+PK-520 or FS-534SD+PK-520 is installed> • The punch home sensor (PS1) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed while the punch drive motor (M1) is energized. • Thick paper is loaded and a punch operation is performed with [Plain Paper] left set for the paper type.
Causes: <When FS-533+PK-519 is installed> • Punch motor (M201) • Punch motor sensor (PS202) • Puncher drive cam sensor (PS203) • Puncher home sensor (PS204) • PK control board (PKCB) • FS control board (FSCB) <When FS-534+PK-520 or FS-534SD+PK-520 is installed> • Punch drive motor (M1) • Punch home sensor (PS1) • FS control board (FSCB)
Remedy: When FS-533+PK-519 is installed 1. Check the number of the holes in [Service Mode] -> [Finisher] -> [Punch Option Setting]. 2. Check the connector between M201-PKCB CN203 for proper connection and correct as necessary. 3. Check the connector of M201 for proper drive coupling and correct as necessary. 4. Check the connector between PS202-PKCB CN204 for proper connection and correct as necessary. 5. Check the connector between PS203-PKCB CN204 for proper connection and correct as necessary. 6. Check the connector between PS204-PKCB CN204 for proper connection and correct as necessary. 7. PS202 I/O check, sensor check • Control signal: PKCB CN204 • Location of electrical component: FS-533 (PK-519) 5-C 8. PS203 I/O check, sensor check • Control signal: PKCB CN204 • Location of electrical component: FS-533 (PK-519) 6-C 9. PS204 I/O check, sensor check • Control signal: PKCB CN204 • Location of electrical component: FS-533 (PK-519) 6-C 10. M201 operation check • Control signal: PKCB CN203-1 to 2 • Location of electrical component: FS-533 (PK-519) 4-C 11. Replace M201. 12. PKCB F201 conduction check 13. Replace PKCB. 14. Replace FSCB. When FS-534+PK-520 or FS-534SD+PK-520 is installed 1. Check that the correct paper type is set. To print on thick paper, change the paper type to [Thick]. 2. If the trouble occurs even when [Paper Type] is set to the correct paper type, select [Service Mode] -> [Security Settings] -> [Engine FW DipSW] and flip SW No. 17 to the ON. NOTE • Changing the setting of Engine FW DipSW results in a longer perforating time and greater punch perforating noise regardless of the paper type. 3. Check the connector between M1-relay CN351-FSCB J7 for proper connection and correct as necessary. 4. Check the connector of M1 for proper drive coupling and correct as necessary. 5. Check the connector between PS1-FSCB J7 for proper connection and correct as necessary. 6. PS1 I/O check, sensor check • Control signal: FSCB J7-5 (ON) • Location of electrical component: FS-534 (PK-520) 7-K 7. M1 operation check • Control signal: FSCB J7-7 to 8 • Location of electrical component: FS-534 (PK-520) 7-K 8. Replace M1. 9. Replace FSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C308

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie