Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C2551, C2553, C2555 — Konica-Minolta bizhub C308

Code: C2551, C2553, C2555

Description: • C2551: Abnormally low toner density detected cyan TCR sensor • C2553: Abnormally low toner density detected magenta TCR sensor • C2555: Abnormally low toner density detected yellow TCR sensor. When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though there is toner in the sub hopper.
Causes: • Developing unit/C,M,Y • Toner cartridge/C,M,Y • Toner empty sensor/Y (PS34) • Toner empty sensor/M (PS33) • Toner empty sensor/C (PS32) • Toner cartridge motor/Y,M,C (M10) • Toner supply motor/Y (M9) • Toner supply motor/M (M8) • Toner supply motor/C (M7) • Front side board (FRB) • MFP board (MFPB)
Remedy: 1. Perform image troubleshooting procedure if image density is low. 2. Reinstall developing unit. 3. Reinstall toner cartridge. 4. Check the connector between the developing unit-FRB CN14 (C2551), CN15 (C2553), CN16 (C2555) for proper connection and correct as necessary. 5. Check the connector between FRB CN1, CN3-MFPB CN4E, CN11E for proper connection and correct as necessary. 6. M10 operation check • Control signal: MFPB CN16E-1 to 4 • Location of electrical component: 15-C 7. M7, M8, M9 operation check • Control signal: MFPB CN16E-5 to 8 (M7), MFPB CN16E-9 to 12 (M8), MFPB CN16E-13 to 16 (M9) • Location of electrical component: 15-C (M7, M8), 16-C (M9) 8. If the toner empty sensor and its surroundings inside the sub hopper are dirtied with toner, clean them. 9. Replace the developing unit. 10. Replace FRB. 11. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C308

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie