Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C392A — Konica-Minolta bizhub C308

Code: C392A

Description: Heating roller temperature sensor contamination (Main of the heating roller). When the machine is in standby mode after a predetermined period of time after the warm-up stage is started, detected temperature of the heating roller temperature sensor (TEMS) higher than a given temperature for a given period of time consecutively
Causes: • Fusing unit • Heating roller temperature sensor (TEMS) • MFP board (MFPB)
Remedy: 1. Wipe the TEMS clean of dirt if any. <Cleaning procedure> • Clear away a dirt or a foreign object on the sensor with a cotton swab. • When a dirt is left even if you cleaned the sensor by above procedure, clear away a dirt or a foreign object on the sensor using a cotton swab dampened with the alcohol. And, wipe off the sensor with a dry cotton swab afterwards. 2. Check the TEMS for installed position and proper connector connection. 3. Check the connection of the fusing unit. 4. Check the fusing unit and MFPB for proper connection and correct or change as necessary. 5. Replace the fusing unit. 6. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C308

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie