Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C9401, C9402 — Konica-Minolta bizhub C308

Code: C9401, C9402

Description: • C9401: Exposure LED lighting failure • C9402: Exposure LED lighting abnormally. • C9401: The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment. • C9402: The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job.
Causes: • LED exposure unit • Flat cable (LED exposure unit) • CCD board (CCDB) • Scanner drive board (SCDB) • MFP board (MFPB)
Remedy: 1. Correct the harness connection between SCDB CN3-LU201 if faulty. 2. Check the connector between SCDB CN2-MFPB CN12E for proper connection and correct as necessary. 3. Check the connector between CCDB CN3-MFPB CN1 for proper connection and correct as necessary. 4. Check the status of the harness between CCDB-MFPB and replace as necessary. 5. Replace the LED exposure unit. 6. Replace CCDB. 7. Replace SCDB. 8. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C308

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie