Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi P-22 — Konica-Minolta bizhub C308

Code: P-22

Description: Color regist adjust failure. • The gap between maximum and minimum value of deviations among each color (the values before averaging) is over the predetermined value. • Average deviation exceeds the predetermined value. • In case the final value of the deviation after stabilization exceeds the predetermined value, it is regarded as failure even if the average deviation is within tolerance.
Causes: • IDC sensor/Fr (IDCS/Fr) • IDC sensor/Rr (IDCS/Rr) • IDC sensor shutter solenoid (SD2) • Front side board (FRB) • MFP board (MFPB)
Remedy: 1. Slide out the drum/developing unit and reinstall it in position. 2. Reinstall or reconnect IDCS/Fr assy or IDCS/Rr assy if it is installed or connected improperly. 3. Check the vertical transport guide for installed position and correct as necessary. 4. SD2 operation check. 5. Replace FRB. 6. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C308

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie