Code: 0018
Description: Developing motor malfunction • The developing motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the developing motor is being rotated.
Causes: • Developing motor (M1) • Printer control board (PRCB)
Remedy: 1 Check the connector between M1-PRCB CN11 for proper connection and correct as necessary. 2 Check the M1 connector for proper drive coupling and correct as necessary. 3 M1 operation check PRCB CN11-3 to 6 13-B to C 4 Replace M1. 5 Replace PRCB.