Code: 0500
Description: Heating roller warm-up failure The thermistor/1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
Causes: • Fusing unit • Printer control board (PRCB) • DC power supply (DCPU)
Remedy: 1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the connector between fusing unit-PRCB CN9 for proper connection and correct as necessary. 3 Check the connector between fusing unit-DCPU CN2 for proper connection and correct as necessary. 4 Replace the fusing unit. 5 Replace PRCB. 6 Replace DCPU.