Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1102 — Konica-Minolta bizhub C3351

Code: C1102

Description: Alignment tray lift motor malfunction <bizhub C3851FS> • While the alignment tray is being lifted, the alignment tray home sensor (FSPS5) is not turned OFF (unblocked) even after the lapse of a given period of time after the alignment tray lift motor (FSM5) is turned ON. • While the alignment tray is being lowered, the alignment tray home sensor (FSPS5) is not turned ON (blocked) even after the lapse of a given period of time after the alignment tray lift motor (FSM5) is turned ON.
Causes: • Alignment tray lift motor (FSM5) • Alignment tray home sensor (FSPS5) • FS control board (FSCB)
Remedy: 1. Check the connector between FSM5-relay CN17-FSCB CN3 for proper connection and correct as necessary. 2. Check the connector of FSM5 for proper drive coupling, and correct as necessary. 3. Check the connector between FSPS5-FSCB CN10 for proper connection and correct as necessary. 4. FSPS5 I/O check, sensor check • Control signal: FSCB CN10-13 • Location of electrical component: 25-Q 5. FSM5 operation check • Control signal: FSCB CN3-1 to 4 • Location of electrical component: 22-Q 6. Replace FSM5. 7. Replace FSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C3351

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie