Description: Power supply malfunction A condition is detected in which no power is being supplied to the MFP board (MFPB).
Causes: • PH unit • Front door switch (SW2) • Right door switch (SW3) • DC power supply (DCPS) • MFP board (MFPB)
Remedy: 1. Check the connector between SW2, SW3-DCPS CN10 for proper connection and correct as necessary. 2. Check the connector between PH unit-relay CN73-MFPB CN21E for proper connection and correct as necessary. 3. SW2, SW3 operation check • Control signal: DCPS CN10-1 to 3 • Location of electrical component: 18-W 4. Replace the PH unit. (bizhub C3851/C3351 / bizhub C3851FS) 5. Replace DCPS. 6. MFPB F5E, F10E conduction check 7. Replace MFPB.