Description: CCD clamp/gain adjustment failure. During the CCD gain adjustment, a condition in which the peak value of the output data is equal to, or less than, 64 occurs three consecutive times during retries.
Causes: • Scanner unit • MFP board (MFPB)
Remedy: 1. Check the connector between scanner unit-MFPB CN23, CN103 for proper connection and correct as necessary. 2. Check for possible extraneous light and correct as necessary. 3. Clean the lens, mirrors, CCD surface, and shading sheet if dirty. 4. Replace the scanner unit. 5. Replace MFPB.