Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0F30 — Konica-Minolta bizhub C350

Code: C0F30

Description: Abnormally low toner density detected Cyan ATDC Sensor
• T/C 0.21 % or less is detected ten consecutive times in the Developing Unit as validated through the toner replenishing amount determination control.
Remedy: 1 Perform image troubleshooting procedure if image density is low. 2 Clean the ATDC Sensor window on the underside of the Imaging Unit if dirty 3 Correct the ATDC Sensor spring moving part if faulty. 4 Clean the ATDC Sensor LED if dirty. 5 Change ATDC Sensor C/M/Y. 6 M3, M4 operation check M3: PWB-MC PJ16MC-4A~7A (Pulse Output) M4: PWB-MC PJ16MC- 10A~13A (Pulse Output) M3: 19-I M4: 19-J. 7 Change Imaging Unit. 8 Change PWB-MC. 9 Change PWB-MFP.

← Xem tất cả mã lỗi Konica-Minolta bizhub C350

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie